HOME > Products > Adhesive tape > ASF-115
ASF-115 series
Applying high strength and low elongation fluoro polymer film as the substrate, ASF-115 has a higher tensile strength than ASF-110 FR.
Use
Roll masking for extrusion lamination, Electric harnesses, Insulation covering,Lining for the friction surface
Characteristics
- -Maximum continuous service temperature : +200℃
- -The surface of the tape has outstanding anti-adhesion qualities as well as easy releaseability,sliding ability, chemical resistance and electric insulation property.
- -The tensile strength in length wise direction is better than that of ASF-110 FR.
General dimensions table
| Product No. | Nominal Thickness （mm） |
width（mm） | length（m） | |
| Normal stock | Maximum Width | |||
| ASF-115 | 0.08 | 50 | 300 | 33 |
Non-standard widths but not greater than the maximum width specified above are available.
General traits table
| Product number | thickness （mm） |
tensile strength （N/25mm） |
stretch （%） |
adhesive strength 180° peeling （N/25mm） |
dielectric strength voltage of base material （kV） |
| AGF-100 FR | 0.13 | 360 | ─ | 9 | 6 |
| 0.15 | 780 | ─ | 13 | 5 | |
| 0.18 | 540 | ─ | 11 | 6 | |
| 0.30 | 1220 | ─ | 14 | 6 | |
| AGF-100A | 0.13 | 360 | ─ | 10 | 6 |
| AGF-500-3 | 0.13 | 400 | ─ | 11 | 5 |
| AGF-500-6 | 0.18 | 730 | ─ | 13 | 5 |
| AGB-100 | 0.13 | 400 | ─ | 11 | ─ |
| 0.18 | 730 | ─ | 13 | ─ | |
| AGB-500-6 | 0.18 | 730 | ─ | 13 | ─ |
| ASF-110 FR | 0.08 | 70 | 180 | 7 | 10 |
| 0.13 | 160 | 180 | 8 | 15 | |
| 0.18 | 250 | 180 | 9 | 18 | |
| 0.23 | 340 | 180 | 10 | 21 | |
| ASF-115 | 0.08 | 100 | 120 | 8 | 10 |
| ASF-116T FR | 0.04 | 40 | 110 | 3 | 5 |
| ASF-118A FR | 0.10 | 220 | 70 | 7 | 10 |
| API-114A FR | 0.06 | 150 | 25 | 5 | 7 |
| 0.08 | 290 | 40 | 5 | 10 | |
| AUE-112B | 0.30 | 400 | 360 | 10 | 25 |
| test method * | － | JIS-L-1096 (Cut strip method) |
JIS-L-1096 (Cut strip method) |
JIS-C-2107 | JIS-C-2107 |
Values of properties in the table are typical, not guaranteed.
* Test method for tensile strength and stretch
ASF-110 FR, ASF-115, ASF-116T FR, ASF-118A FR, AUE-112B: JIS-K-7137-2,
API-114A FR: JIS-C-2107